The Gilgen FD20 swing door operator is strong, highly versatile, and suitable for new installations or building upgrades. All door types, including fire doors, can be easily automated and ideal for internal lightweight and external heavyweight doors.
This Swing Door Drive Unit is powerful enough to act as an exterior door, able to open comfortably in adverse weather conditions, but is also suitable for internal use.
Operations
- All-pole main switch allows safe and easy disconnection from the mains by customers
- Easy-to-use integrated display and joystick
- Built-in program selector makes changing operating modes simple
- Long service life through USB interface powered software updates
- Efficient energy supply and low standby consumption via switched network-supply unit
- Closing-force adjustment screw makes setup and installation straightforward
Automatic operator
The swing door operator has a spring force and adjustable closing (EN 3-7) for different door leaf widths under EN 1154.
Fully automatic or low energy operations are complete with back check and adjustable hold open, transom mounted with standard rods/sliding rods fitted to the door leaf.
Integrated INVERSE function- If required, the FD 20 can be configured to ‘Inverse’, in order for the door to always fail in the OPEN condition. This is especially suitable for smoke ventilation or emergency escapes.
- Operator height 95mm, depth (back to front) 120mm, width 690mm
- Wind load regulation and integrated LCD control panel
- Maximum door leaf weight of 250kg
- Maximum leaf width 1600mm. Minimum door width 720mm
Unmatched Functionality
- The FD20 incorporates Full Power, Low Energy, and Inverse functions in one unit
- Electromechanical opening system
- Controlled spring-actuated closure with motor assistance and in the event of a power failure
- No travel stops required except fire-rated doors
Activation and control system per door set
- Built-in program selector keys are located on the side of the operator
- Key switch configured for off, automatic, and hold open operating modes
Entry & Exit
- Activation sensor ensures door opens on approach
- Stainless steel push plate – engraved with your choice of wording
- Access control system is simple and easy to use
Safety in an emergency
- Controlled spring-actuated closure in the event of a fire or power cut
- «Invers» power-down function for smoke and heat extraction
- Available with an optional smoke detector
- FD20 can work with 4Safe and Flat Scan 3G Infrared safety sensors or a safety provider of your choosing. They are mounted on the top rails of the front and back of the door, providing maximum safety in compliance with EN 16005
- Customers must buy and install suitable finger protection to comply with EN16005 & the Machinery Directive 2006/42/EC, to protect against potential hazards caused at the hinge or pivot stile
Reliable everyday operation
- Obstacle-detection system has an automatic stop and reverse mechanism to avoid safety issues
- Door-mounted safety sensors
- Smooth, noise-free operation
- Has a very low power consumption when in standby mode (4 watts)
- Illuminated program selector keys integrated in side cover for visibility
- Intelligent wind-load compensation for external use in high wind areas
Heavyweight external door
- Integrated protection designed to reliably open and close whilst withstanding winds of up to 80km/h
- Smooth operation with functions including reinforced closure and adjustable hold-open time
- External elements and accessories are electrically powered
Door Materials
Works with
- Maglock
- Electric strike
Finishes
- All visible operator surfaces to be Powder Coated to a standard RAL colour
- Upon request unit can be supplied with a PCP finish to all visible aluminum surfaces (excluding arm)
- Continuous cover available for double door configurations
Signs
- Standard signage to comply with EN16005
- Manifestation not included
Barriers
- Safety barrier rails should be installed if it is possible to approach the doors from the side (EN16005)
Associated works per door set
- 1no. 240v 13A LIVE neon lit fused spur supply, protected by a 30mA RCD must be provided prior to installation
- If required to connect to the fire alarm system a pair of normally open volt free contacts are to be supplied terminating at the drive unit location by others
Straight-forward setup and installation
Easy Installation
- Can be installed to lintel or door leaf
- Push and pull operations with standard or sliding arm options
- Consistent installation position
- Reliable plan-compatibility is ideal for a wide range of application options
- An all-pole circuit-breaking master switch is integrated into the side cover
Configurations
- There is no need for additional programmers as all functions of the FD20 are accessible via the on-board interface
- Includes an operating sequence and opening angle
- The push and go functionality means the door will automatically open when someone pushes or pulls it
- Possibility for a simple set up and an electronic closing-sequence for two-leaf/double doors
- Interlocking function
Safety Tested
- Independently tested – TÜV-Nord
- EN16005, DIN 18650 compliance
Compatible Activation and Controls
The following features are compatible with the FD20 Swing Door Driver but do not come included with this model.
- Safety sensors and radar devices for automated sequences and functionality
- Contactless detection sensors
- Hand-held radio transmitter
- Foot or elbow-operated switches
- Key-operated pulse switches and badge or pass scanners to prevent unauthorised or unintentional use
- Electric locks and locking devices
- D-BEDIX external control unit
Purchasing a new security door
Ready to purchase your new security door? Get in touch by phone (0800 316 6994), email (estimating@gdukds.com) or the online contact form at the bottom of the page.
For more information about the purchase and installation process, access our comprehensive guide on buying your new door.
FD20